86 • DashBoard Interface Overview RCP-ME User Guide (v4.0)
Breakaways # # The list number of the breakaway (read-only)
Name <text> The name assigned for the breakaway. The names
are user configurable
level mask (1...32) 1-32 Click a router level to:
• assign a level mask ( ) or
• de-select a level mask ( )
If using with an Ultricore control system, these
level numbers correlate to the Level ID in the
Ultricore database.
Breakaways Clear Click this button to clear all level masks for a
given breakaway
Set Click this button to apply all selected level masks
for a given breakaway
Configuration Cutbus Mode Off Turn off cutbus mode
Normal Single or dual cutbus. Cutbus operation is
automatically invoked when there are no
destination buttons or crosspoints set on the
RCP-ME.
Multi Advanced cutbus mode that utilizes crosspoint
buttons to support an arbitrary number of cutbus
outputs. Cutbus operates as a collection of
crosspoint buttons that, when selected, will display
source and destination information about the
selected crosspoint on the LCD screen
Permanent Category
Mode
Off Panel is in standard multi-page menu layout with
optional category mode assignment
On Panel is permanently in Category mode. No
multi-page menus or other key assignments are
available.
Cutbus Dest 1 # Enter or select an output from the top row of
buttons for the cutbus destination if using Normal
Cutbus Mode
Cutbus Dest 2 # Enter or select an output from the bottom row of
buttons for the cutbus destination if you want to
use dual Normal Cutbus Mode. For single cutbus
mode, this must be set to the same destination as
Cutbus Dest 1.
On Brightness # Enter or select a brightness level between 1 and 8
for the buttons when they are selected (with 1
being the dimmest and 8 being the brightest).
Off Brightness # Enter or select a brightness level between 0 and 8
for the buttons when they are not selected (with 0
turning off brightness, 1 being the dimmest, and 8
being the brightest)
Table 16.5 Configuration Tab
Area Item Parameters Description
To Next Page
Loading...