Rosslare AC-015 User Manual

AC-015 Page 38 March 2008
• The DOOR LED will
remain orange
• The MODE LED will
flash green
Mode Door
GREEN ORANGE
5) Present the proximity card designated for this
slot number to the reader.
• The MODE LED will stop flashing
OR,
• Enter the 4-digit PIN code designated for this
slot number
• The MODE LED will stop flashing
6) To enroll another card, enter the 3-digit slot
code you wish to assign to the next employee.
• The MODE LED will start flashing
7) Present the proximity card designated for this
slot number to the reader.
• The MODE LED will stop flashing
OR,
• Enter the 4-digit keyboard based employee
code designated for this slot number to the
reader
• The MODE LED will stop flashing
Continue enrolling cards or entering keyboard
employee codes in this manner until all
employee codes are entered.
NOTE: The AC-015 programmer will not accept
employee codes that are already allocated
to a slot. The AC-015 will signal this with a long
beep and the MODE LED will continue to flash
green.

Rosslare AC-015 Specifications

General

Brand	Rosslare
Model	AC-015
Category	IP Access Controllers
Language	English