Rosslare AC-015 - Page 46

AC-015 Page 44 March 2008
6) Enter the 4-digit
Programming Code. (This
last step confirms that
you intentionally want to
delete all your initial
settings and employees
from the system!)
?
?
?
?
• You will hear 3 beeps
• The system will return to Normal mode
IMPORTANT:
• Facilty Code 000 means that any Proximity
card can be learned, with any Facility
Code.
• It is recommended to program Facility Code
once before programming any employee
Codes. Changing Facility Code after codes
are programmed will cause previous codes
with different Facility Code to disappear
while still occupying the code slot number.
• If Facility Code is not 000, programming any
Proximity Card with another Facility Code is
prohibited, however, PIN codes are not
affected.