4) Remove the case screw from the controller
(see diagram below to locate the case
screw) and remove the front case from the
controller.
5) Mount the controller to the wall using the two
screws provided in the Installation Kit or use
the screws provided with your US Gang Box
when mounting to a US Gang Box.
6) Wire the controller according to the diagrams
on the next few pages.
7) Return and secure the front case using the
security screw and security tool provided in
the Installation Kit.
You now have mechanically installed the
controller.
AC-020 Page 18 03/02
0
8
5
21
46
3
97
#
DOOR 1 DOOR 2
Case Screw
3 x 4 Matrix Keypad
Door 2 LED
Door 1 LED
To Next Page
Loading...
Need help?
General
