Rosslare AC-020 User Manual

Changing the Modes of Operation
NOTE: Changing the modes of operation can be
done by entering the correct code into the
Controller’s Programming keypad or the
external reader’s keypad.
Changing from Normal Mode to
Secure Mode
1) The controller is in Normal Mode
• DOOR 1 / DOOR 2
LED is green
DOOR 2
GREEN
DOOR 1
2) Enter your Normal / Secure PIN Code
• DOOR 1 / DOOR 2
LED will flash red
DOOR 2
RED
3) Press the “*/#” key, respectively.
• DOOR 1 / DOOR 2
LED will turn red
DOOR 1 DOOR 2
RED
AC-020 Page 25 03/02
• You are now in Secure Mode

Rosslare AC-020 Specifications

General

Brand	Rosslare
Model	AC-020
Category	Gateway
Language	English