AC-020 Page 59 03/02
Replacing a Lost Normal / Secure
Code
In the event that your Normal / Secure Code is
lost and you are locked in Secure Mode,
complete the following procedure to re-enter
Normal Mode so that you may program a new
Normal / Secure Code.
The AC-020 must be in Secure Mode otherwise
this will not work.
Make sure that the DOOR 1 / DOOR 2 LED is red
before proceeding.
1) Disconnect power from the AC-020
2) Press the appropriate REX button
3) Reconnect power to the unit with the REX
button pressed
4) Release the REX button
You now have 20 seconds to enter the default
Secure Code, 3838 for Door 1 or 8383 for Door 2,
to re-enter into Normal Mode.
To Next Page
Loading...
Need help?
General
