If the programming code is valid, three beeps will be heard
and the controller will return to its normal mode.
If the programming code is invalid, a long beep will be heard
and the controller will return to its normal mode.
It is recommended that a record be kept of added and
deleted users so that it will be easier to keep track of which
user slots are empty and which user slots are not.
Deleting Primary and Secondary Codes using the Code Search
Method
1) Enter the Programming
Mode.
2) Press 8 to enter Menu 8.
• The Door LED will turn
orange
• The Mode LED will turn red
3) Enter 000 as the 3-digit User Slot number.
• The Mode LED will turn
red.
• The Door LED will flash
orange.
The controller is now waiting for the Primary Code of the User you
want to delete.
4) Enter the 4-8 digit PIN Code of the
Primary Code belonging to the user you
want to delete.
• The Mode LED will flash red
• The Door LED will flash
orange
5) Enter your Programming Code to confirm the deletion.
If the Programming Code is valid, you will hear three beeps and
the unit will return to Normal Mode.
To Next Page
Loading...
Need help?
General
