Controller Functionality
AYC-Fx4 and AYC-Gx4 family manual Page 49
If the Primary Code entered is not valid, you will hear a long beep
and the AYC-Fx4/AYC-Gx4 will continue to wait for a valid Primary
Code.
5) Enter the Code to be used as the Secondary Code.
If the Secondary Code is valid, the controller will beep three times
and return to Normal Mode.
If the Secondary Code is invalid the controller will sound a long
beep, and the AYC-Fx4/AYC-Gx4 will continue to wait for a valid
Secondary Code to be entered.
6.9.15. Deleting Primary and Secondary Codes
There are two methods to delete Primary and Secondary codes:
the Standard Method and the Code Search Method.
When deleting a User Slot, both the Primary Code and the
Secondary code are erased.
Deleting Primary and Secondary Codes using the Standard Method
1) Enter the Programming
Mode.
2) Press 8 to enter Menu 8.
• The Door LED will turn
orange
• The Mode LED will turn red
3) Enter the 3-digit User Slot code you wish
to delete.
• The Mode LED will flash
red Indicating the
controller is waiting for the
Programming Code to confirm the deletion.
If the User Slot is empty, you will hear a long beep and the
AYC-Fx4/AYC-Gx4 will return to Normal Mode.
4) Enter your programming code to
confirm the deletion.
To Next Page
Loading...
Need help?
General
