Weather-resistant, meets IP-65, epoxy potted,
0.474 lb (215g) 0.353 lb (160g)
*Measured using Rosslare proximity card (AT-14) or equivalent. Range also
depends on electrical environment and proximity to metal.
2.1 Key Features
The key features for the AYC-Fx4 and AYC-Gx4 series are:
• Built-In Proximity Card Reader (125 KHz ASK Modulation)
(for 64 series only)
• Red backlit keypad
• Optical back tamper sensor and open controller tamper
output.
• Lockout feature on wrong entries (Keypad / Card Tamper)
• Internal buzzer provides audible interface feedback
• Two status / programming Interface LEDs (tri-colored)
• Fully potted construction for outdoor use
• Comes with mounting template for easier installation
• Comes with an installation kit that includes a security screw
and a security screw tool