3) Construct a code using instructions hereafter.
First Digit
For fail secure operation, the first digit is set to 0.
For failsafe operation, the first digit is set to 1.
Second Digit
Siren Time in minutes (1-9, 0-disabled)
Third and Fourth Digits
Enter the number of seconds (from 1 to 99) that
you want the Lock Strike to be released.
For example, 0312 means Fail Secure Operation, a 3-minute Siren,
and a 12-second Lock Strike release time.
4) System returns to its normal mode.
• You will hear three beeps.
• The Door LED will turn off.
• The Mode LED will turn green.
• Default value is 0004 which corresponds to Fail Secure
operation, no siren, and 4-seconds Lock Strike release time.
6.9.10. Defining the Auxiliary Input and Output
The default auxiliary setting is 2004.
1) Enter the Programming
Mode.
2) Press 6 to enter Menu 6.
• The Mode LED will flash
green
To Next Page
Loading...
