Rotabroach Element 75 - User Manual

Element 75 Manual Original Instructions Aug 2016
1
Magnetic drilling & tapping machine
Model Number Element 75/1T, Element 75/3T
This machine (Serial Number ...........................) is CE approved.
Rotabroach Ltd
Burgess Road
Sheffield, South Yorkshire
United Kingdom
S9 3WD
Tel: +44 (0) 114 2212 510 Fax: +44 (0) 114 2212 563
Email: info@rotabroach.co.uk Website: www.rotabroach.co.uk

Summary

Intended Use

General Safety Rules

Information Plate Symbols

Specification

Operational Safety Procedures

Operating Instructions

Control Panel Operation

Power Indicator

The RED LED indicates that the drill is connected to the power supply.

Magnet Engagement

Control the magnet ON/OFF using a large button; LED indicates material thickness for adhesion.

Motor Control

Starts and stops the motor using a GREEN switch; magnet remains active when motor is off.

Cutting Process Guidance

Utilizes the CutSmart™ visual indicator for optimal force application during cutting.

Motor Shutdown

Press the GREEN switch to stop the motor; the magnet stays engaged.

Tapping Function

Gear Selection

Magnet Holding Force

Extension Cable Guidelines

Cutter Mounting Procedure

Capstan Handle Operation

Troubleshooting Hole Making

Electrical Wiring Diagram

Machine Exploded View

Motor and Gearbox Exploded View

Control Panel Components

Pipe Cutting Adaptor

Chuck Installation

Machine Maintenance Schedule

Troubleshooting Guide

Cutter and Speed Recommendations

Warranty Information

Rotabroach Element 75 Specifications

General

Model	Element 75
Type	Magnetic Drill
Category	Drill
Motor Power	1800 W
Weight	25 kg
Max Twist Drill Capacity	31.75 mm
Max Cutter Capacity	75 mm
Cutter Depth	75 mm
Power Source	Electric
Arbor Size	19 mm