Rotabroach ELEMENT 50 LOW PROFILE 1 User Manual

Magnetic drilling machine
Model Number
ELEMENT 50 LOW PROFILE 1, ELEMENT 50 LOW PROFILE 3
This machine (Serial Number ...........................) is CE approved.
OSL Cutting Technologies Ltd
Burgess Road
Sheffield, South Yorkshire
United Kingdom
S9 3WD
Tel: +44 (0) 114 2212 510 Fax: +44 (0) 114 2212 563
Email: info@rotabroach.co.uk Website: www.rotabroach.co.uk

Rotabroach ELEMENT 50 LOW PROFILE 1 Specifications

General

Model	ELEMENT 50 LOW PROFILE 1
Type	Magnetic Drill
Max Cutting Depth	50 mm
Speed	450 RPM
Maximum Cutter Diameter	50 mm
Capacity	50 mm
Low Profile Design	Yes
Application	Metal Drilling
Shank Type	Weldon

Summary

Intended Use

General Safety Rules

Electrical Safety

Rules for safe use of electrical power and connections to prevent shock.

Personal Safety

Precautions for operator alertness, protective equipment, and proper attire.

Specification

Operational Safety Procedures

Operating Instructions

Control Panel Operation

Mounting of Cutters

Remedies for Hole Making Problems

Maintenance

Routine Maintenance Checks

Trouble Shooting

Cutter Selection and Speeds