Rotabroach ELEMENT 50 LOW PROFILE 1 - Control Panel Operation

Element 50 Low Profile Manual Original instructions 2019
8
7) CONTROL PANEL OPERATION
CutSmart™ Technology
Green Zone
Perfect, try to keep in
the green zone for
the best cut and
optimum machine
performance.
Yellow Zone
A little too much
pressure on the drill
ease off to get back
to the green zone.
Red Zone
Overload: Back off
immediately as too
much force will cause
the motor to cut off if
you continue.
CutSmart™ Technology
Designed for you to get the most out of your
machine and your cutters. CutSmart has an
easy to read panel that indicates when you
are drilling with too much force, which will
damage the machine and the cutters.
Allow the cutter to do the work and you will
find that a much smoother hole and faster
drilling time is achieved.