Rotabroach Element 30 Series - User Manual

Element 30 Manual Original instructions Dec 2014
1
Magnetic drilling machine
Model Number Element30/1, Element30/3
This machine (Serial Number ...........................) is CE approved.
Rotabroach Ltd
Imperial Works, Sheffield Road
Sheffield, South Yorkshire
United Kingdom
S9 2YL
Tel: +44 (0) 114 2212 510 Fax: +44 (0) 114 2212 563
Email: info@rotabroach.co.uk Website: www.rotabroach.co.uk

Summary

1) Intended Use

2) General Safety Rules

3) Information Plate Symbols

4) Specification

5) Operational Safety Procedures

6) Operating Instructions

7) Control Panel Operation

CutSmart2 Technology

Explains the CutSmart2 system for monitoring drilling force.

8) Magnet Detection

9) Extension Cable Selection

10) Mounting of Cutters

11) Capstan Operation

12) Remedies for Hole Making Problems

13) Wiring Diagram

14) Exploded View of Machine

15) Exploded View of Motor and Gearbox

16) Control Panel and Parts List

17) Pipe Adaptor Kit RD2311

Fitting Instructions

Details the steps for attaching and securing the pipe adaptor to the machine.

18) Fitting the Chuck

19) Maintenance

Maintenance Checks

Covers visual inspection and operational verification for machine maintenance.

20) Trouble Shooting

21) Cutter Selection and Speeds

22) Warranty Statement

Rotabroach Element 30 Series Specifications

General

Model	Element 30 Series
Speed (No Load)	450 RPM
Weight	10.5 kg
Voltage	110V or 230V
Hole Diameter Range	12-30 mm
Shank Type	Weldon
Shank Size	19.05 mm (3/4")
Material	Steel
Drilling Capacity	30 mm
Arbor	19.05 mm (3/4") Weldon
Coolant System	Integrated
Application	Magnetic drilling