Rotabroach Element 30 Series - 21) Cutter Selection and Speeds

Element 30 Manual Original instructions Dec 2014
22
21) CUTTER SELECTION AND SPEEDS
Material
Material Hardness
Cutter
Mild and free cutting steels
<700N/mm²
RAP or RAPL
Mild and free cutting steels
<850N/mm²
SRCV or SRCVL
Steel angle and joists
<700N/mm²
RAP or RAPL
Steel angle and joists
<850N/mm²
SRCV or SRCVL
Plate and sheet steel
<700N/mm²
RAP or RAPL
Plate and sheet steel
<850N/mm²
SRCV or SRCVL
Aluminium
<750Nmm²
RAP or RAPL
Aluminium
<850N/mm²
SRCV or SRCVL
Brass
<700N/mm²
RAP or RAPL
Brass
<850N/mm²
SRCV or SRCVL
Cast iron
<700N/mm²
RAP or RAPL
Cast iron
<850N/mm²
SRCV or SRCVL
Stainless steel
<700N/mm²
RAP or RAPL
Stainless steel
<850N/mm²
SRCV or SRCVL
Stainless steel
>850N/mm²
CWC to CWCX
Rail track
>850N/mm²
SCRWC or SCRWCL
Tool steel
>850N/mm²
CWC to CWCX
Die Steel
>850N/mm²
CWC to CWCX