2
SAFETY INSTRUCTIONS
• Daily inspect your lift. Never operate if it malfunctions
or if it has broken or damaged parts. Use only qualified
lift service personnel and genuine Rotary parts to make
repairs.
• Thoroughly train all employees in use and care of lift,
using manufacturer’s instructions and “Lifting It Right” and
“Safety Tips” supplied with the lift.
• Never allow unauthorized or untrained persons to position
vehicle or operate lift.
• Prohibit unauthorized persons from being in shop area
while lift is in use.
• Do Not permit anyone on lift or inside vehicle when it is
either being raised or lowered.
• Always keep area around lift free of tools, debris, grease,
and oil.
• Never overload lift. Capacity of lift is shown on
nameplate affixed to the lift.
• Do Not stand in front of the lift or vehicle while it is being
positioned in lift bay.
• Do Not hit or run over lift arms or adapters. This could
damage lift or vehicle. Before driving vehicle into lift
bay, position arms and adapters to provide unobstructed
entrance onto lift.
• Load vehicle on lift carefully. Position lift adapters to
contact at the vehicle manufacturer’s recommended lift
points. Raise lift until adapters contact vehicle. Check
adapters for secure contact with vehicle. Raise lift to
desired working height.
DO NOT go under vehicle if locking latches are
not engaged.
• Do Not block open or override self-closing
lift controls; they are designed to return to the “Off” or
Neutral position when released.
• Do Not remove or disable arm restraints.
• Remain clear of lift when raising or lowering vehicle.
• Always use safety stands when removing or installing
heavy components.
• Avoid excessive rocking of vehicle while on lift.
• Clear area if vehicle is in danger of falling.
• Remove tool trays, stands, etc. before lowering lift.
• Release locking latches before attempting to lower lift.
• Position lift arms and adapters to provide an
unobstructed exit before removing vehicle from lift area.
Authorized personnel
only in lift area.
©
CAUTION
Read operating
and safety manuals
before using lift.
©
SAFETY
INSTRUCTIONS
WARNING
Position vehicle
with center of gravity
midway between
adapters.
©
CAUTION
Use vehicle
manufacturer’s
lift points.
©
WARNING
Do not override
self-closing
lift controls.
©
Keep feet
clear of lift
while lowering.
©
WARNING
WARNING
Remain clear of lift
when raising or
lowering vehicle.
©
CAUTION
Always use
safety stands when
removing or installing
heavy components.
©
WARNING
Avoid excessive
rocking of vehicle
while on lift.
c
WARNING
Clear area if vehicle
is in danger of falling.
©
CAUTION
Auxiliary adapters
may reduce
load capacity.
©
SAFETY
INSTRUCTIONS
Do not operate
a damaged lift.
©
CAUTION
Lift to be used
by trained operator
only.
©
?
?
?
SAFETY
INSTRUCTIONS
Proper maintenance
and inspection
is necessary
for safe operation.
c
To Next Page
Loading...
Need help?
General
