Rotary Sprinter SPO15 User Manual

3
OWNER/EMPLOYER RESPONSIBILITIES
CAUTION
Lift to be used
by trained operator
only.
©
?
?
?
SAFETY
INSTRUCTIONS
Proper maintenance
and inspection
is necessary
for safe operation.
c
The Owner/Employer:
• Shall ensure that lift operators are qualified and that they are trained in
the safe use and operation of the lift using the manufacturer’s operating
instructions; ALI/SM07-1, ALI Lifting it Right safety manual; ALI/ST-05
ALI Safety Tips card; ANSI/ALI ALOIM-2008, American National Stan-
dard for Automotive Lifts-Safety Requirements for Operation, Inspection
and Maintenance; ALI/WL Series, ALI Uniform Warning Label Decals/
Placards; and in the case of frame engaging lifts, ALI/LP-GUIDE, Vehicle
Lifting Points/Quick Reference Guide for Frame Engaging Lifts.
• Shall establish procedures to periodically inspect the lift in accordance
with the lift manufacturer’s instructions or ANSI/ALI ALOIM-2008, Ameri-
can National Standard for Automotive Lifts-Safety Requirements for
Operation, Inspection and Maintenance; and The Employer Shall ensure
that lift inspectors are qualified and that they are adequately trained in
the inspection of the lift.
• Shall establish procedures to periodically maintain the lift in accordance
with the lift manufacturer’s instructions or ANSI/ALI ALOIM-2008, Ameri-
can National Standard for Automotive Lifts-Safety Requirements for
Operation, Inspection and Maintenance; and The Employer Shall ensure
that lift maintenance personnel are qualified and that they are adequate-
ly trained in the maintenance of the lift.
• Shall maintain the periodic inspection and maintenance records recom-
mended by the manufacturer or ANSI/ALI ALOIM-2008, American Na-
tional Standard for Automotive Lifts-Safety Requirements for Operation,
Inspection and Maintenance.
• Shall display the lift manufacturer’s operating instructions; ALI/SM, ALI
Lifting it Right safety manual; ALI/ST-05 ALI Safety Tips card; ANSI/ALI
ALOIM-2008, American National Standard for Automotive Lifts-Safety
Requirements for Operation, Inspection and Maintenance; and in the
case of frame engaging lifts, ALI/LP-GUIDE, Vehicle Lifting Points/Quick
Reference Guide for Frame Engaging Lifts; in a conspicuous location in
the lift area convenient to the operator.
• Shall provide necessary lockout/tagout means for energy sources per
ANSI Z244.1-2003 (R2008), Safety Requirements for the Lockout/Tagout
of Energy Sources, before beginning any lift repairs.
• Shall not modify the lift in any manner without the prior written consent of
the manufacturer.

Rotary Sprinter SPO15 Specifications

General

Brand	Rotary
Model	Sprinter SPO15
Category	Lifting Systems
Language	English