EasyManuals Logo

Rotax 915 i A SERIES Service Instruction

Rotax 915 i A SERIES
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
d06863.fm
18 November 2020 78-20-00
Revision 1 Page 2 of 23
Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
SI-915 i-007R1
SERVICE INSTRUCTION
1.7) Labor time
Estimated labor hours:
Engine installed in the aircraft - - - labor time will depend on airframe installation and therefore no
estimate is available from the engine manufacturer.
1.8) Mass data
Change of weight - - - insignificant.
Moment of inertia - - - unaffected.
1.9) Electrical load data
No change.
1.10) Software modifications
Yes. See section 1.2 and 2.6.
1.11) References
In addition to this technical information refer to current issue of
- Illustrated Parts Catalog (IPC)
- Installation Manual (IM)
- Maintenance Manual Line (MML)
- Maintenance Manual Heavy (MMH)
NOTE: The status of the Manuals can be determined by checking the table of amendments.
The 1
st
column of this table shows the revision status. Compare this number to the one
listed on the ROTAX website:
www.flyrotax.com
. Updates and current revisions can be downloaded for free.
1.12) Other Publications affected
None.
1.13) Interchangeability of parts
Old and new parts are NOT interchangeable as they have different fixation positions for the turbo-
charger assy.

Other manuals for Rotax 915 i A SERIES

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rotax 915 i A SERIES and is the answer not in the manual?

Rotax 915 i A SERIES Specifications

General IconGeneral
BrandRotax
Model915 i A SERIES
CategoryEngine
LanguageEnglish

Related product manuals