Rotax 915 i A SERIES Service Instruction

d06863.fm
SI-915 i-007R1
SERVICE INSTRUCTION
18 November 2020 78-20-00
Revision 1 Page 5 of 23
Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
3) Accomplishment/Instructions
-ROTAX
®
reserves the right to make any amendments to existing documents, which might
become necessary due to this standardization, at the time of next revision or issue.
NOTE: Before accomplishment, review the entire documentation to make sure you have a
complete understanding of the procedure and requirements.
Accomplish-
ment
All measures must be implemented and confirmed by at least one of the following persons or
organizations:
-ROTAX
®
- Authorized Distributors or their independent Service Centers
- Persons with approved qualifications for the corresponding engine types. Only authorized per-
sons (iRMT, Level Heavy Maintenance) are entitled to carry out this work
NOTE: All work has to be performed in accordance with the relevant Maintenance Manual.
NOTE: Indicates supplementary information which may be needed to fully complete or under-
stand an instruction.
General All general inspection, maintenance and repair has to be carried out e.g. in accordance with rele-
vant Advisory Circular AC 43.13 from FAA.
Advisory
Circular
This Manual "Advisory Circular" AC describes maintenance methods, techniques and practice.
These are recognized and authorized for inspection and repairs in non-pressurized areas for
which there are no separate maintenance and repair instructions.
3.1) Spare Parts - related information
3.2) Installation - related information
m
WARNUNG
m
WARNING
Danger of severe burns and scalds!
Allow the engine and exhaust system to cool to ambient temperature
before starting work
All work has to be performed in accordance with the relevant Maintenance Manuals of
the respective engine type.
See current Illustrated Parts Catalog (IPC) for the respective engine type.
See current Installation Manual (IM) for the respective engine type.
m
WARNUNG
NOTICE
Connection turbocharger bracket with engine suspension frame requires
a Metric or UNF fixed connection.

Rotax 915 i A SERIES Specifications

General

Brand	Rotax
Model	915 i A SERIES
Category	Engine
Language	English