Rotel RCD-965BX - Safety Instructions and Warnings; General Operation Safety Guidelines; Electrical Hazard Precautions

SAFETY INSTRUCTION
1. Read Instructions- All the safety and operating in¬
structions should be read before the appliance is
operated.
2. Retain Instructions — The safety and operating instruc¬
tions should be retained for future reference.
3. Heed Warnings— All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow Instructions- All operating and use instruc¬
tions should be followed.
5. Water and Moisture- The appliance should not be
used near water ~ for example, near a bathtub, washbowl
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, and the like.
6. Carts and Stands -the ap¬
pliance should be used only with a
cart or stand that is recommended
by the manufacturer.
6A. An appliance and cart com¬
bination should be moved with
care. Quick stops, excessive force,
and uneven surfaces may cause
the appliance and cart combina¬
tion to overturn.
7. Wall or Ceilling Mounting - The appliance should be
mounted to a wall or ceilling only as recommended by the
manufacturer.
8. Ventilation -The appilance should be situated so that
its location or position does not interfere with its proper
ventilation.For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may
block the ventilation openings; or placed in a built-in instal¬
lation such as a bookcase or cabinet that may impede the
flow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
10. Power Sources - The appliance should be connected
to a power supply only of the type described in the operat¬
ing instructions or as marked on the appliance.
11. Grounding or Polarization- The precautions that
should be taken so that the grounding or polarization
means of an appliance is not defeated.
12. Power-Cord Protection - Power-supply cords should
be routed so that thay are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience recep¬
tacles, and the point where thay exit from the appliance.
13. Cleaning - The appliance should be cleaned only as
recommended by the manufacturer.
14. Nonuse Periods- The power cord of the appliance
should be unplugged from the outlet when left unused for
a long period of time.
15. Object and Liquid Entry- Care should be taken so
that objects do not fall and liquids are not spilled into the
enclosure through openings.
16. Damage Requiring Service- The appliance should
be serviced by qualified factory authorized service person¬
nel when:
A. The power-supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
appliance; or
PORTABLE CART
WARNING
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
17. Servicing - The user should not attempt to service the
appliance beyond that described in the operating instruc¬
tions. All other servicing should be referred to qualified
factory authorized service personnel.
WARNING: To reduce the risk of fire or electric
shock, do not expose this appliance to rain or
moisture
CAUTION
RISK OF ELECTRIC SHOCK
00 NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
• Explanation of Graphical Symbols
The lightning flash with arrowhead sym¬
bol,within an equilateral triangle,is in¬
tended to alert the user to the presence
of uninsulated "dangerous voltage"
within the product's enclosure that may
be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equi¬
lateral triangle is intended to alert the user
to the presence of important operating
and maintenance(servicing) instructions
in the literature accompanying the ap¬
pliance.
EXCLUSIVE NOTE FOR U.K.
if your unit comes with a 2-core mains lead without a
plug, neither core is to be connected to the earth
terminal of a three pin plug, make certain that they are
connected, according to the following instruction, to
the proper terminals. Check that the terminals are
screwed down firmly and no loose strands of wire are
present.
IMPORTANT: The wires in this mains lead are coloured
in accordance with the following code:
BLUE: NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug
proceed as follows:
The wire which is coloured BLUE must be connected
to the terminal which is marked with the letter N or
coloured BLUE or BLACK. The wire which is coloured
BROWN must be connected to the terminal which is
marked with the letter L or coloured BROWN or RED.
1