Roth Touchline SL User Manual

Block diagram illustrating the main navigation options within the controller's menu.

Diagram explaining how to set the system's operation mode globally across all zones.

Configuration options for individual zones, including ON/OFF, sensor type, and operation modes.

Setting the desired temperature for a zone, either manually or via the thermostat.

Selecting the operating mode for a zone: local schedule, global schedule, constant, or time-limited.

User configurable settings for heating, cooling, and temperature modes within a zone.

Configuration and registration of floor heating sensors and related parameters.

Intelligent system that optimizes heating start times to reach pre-set temperatures efficiently.

Defines temperature tolerance to prevent oscillation, applicable to room and floor sensors.

Procedure for calibrating room or floor sensors to ensure accurate temperature readings.

Adding and controlling Roth Touchline® SL wireless radiator actuators for individual zones.

Adding and controlling Roth Touchline® SL Window contacts for zone-specific detection.

Enables remote control of the system via a WiFi internet module.

Registration and configuration of additional contacts like valve modules for system control.

Settings for Domestic Hot Water (DHW) operation, including ON/OFF, operation mode, and schedule.

Activating and configuring weather-based control using external temperature sensors.

Configuring heating and cooling modes, including automatic switching based on heat pump signals.

Setting maximum humidity levels to protect floors from condensation during cooling.

Controlling an additional valve using a Roth Touchline® SL Valve module for outdoor compensation.

Used for setting separate schedules for a single zone.

Used for setting schedules that apply to all zones simultaneously.