62
7.7.1.8 Travel information
Travel information can be accessed by repeatedly pressing the MENU button on
the control panel. The information available is: Time, Range, Trip Length, Trip Ca-
lories, Trip Duration, Trip Average Speed, Maximum Speed, Total Kilometres and
Total Time.
7.7.1.9 System settings and messages
With the standard display you can adjust the date and time, reset the travel infor-
mation and change the language. To do so please proceed as follows: Press and
hold the Lighting button for >_ 3 seconds. Then repeatedly press the MENU button
until the required menu is selected. The + and – buttons can adjust the required
output quantity. Confirm by pressing the Light button for ≥3 seconds.
7.7.1.9.3 System messages
The drive system constantly monitors itself and in the event of a known error this
will be shown by an encrypted number. The system may turn itself off automati-
cally depending on the type of error. In any case a ROTWILD authorised retailer
should be informed of system messages. The course of action will be agreed with
the ROTWILD authorised retailer.
To Next Page
