8.2 Genuine spare parts
The individual components of the bike were carefully selected and coordinated. In
its as-supplied condition the bike corresponds with all strength, stability and sa-
fety requirements (EC conformity).
To retain EC conformity only genuine spare parts may be used during maintenance
and repairs.
Changes to the bike could lead to the loss of EC conformity. As soon
as relevant alterations or amendments are made it is your own res-
ponsibility to once again obtain conformity with the EC Directive,
see also 4.8: Operator's duty of care
Using child seats or child trailers is not permitted.
8.3 Maintenance I
The following inspection and servicing measures may be regularly carried out by
the operator/rider. If in doubt follow the advice of a ROTWILD authorised retailer.
– Tyre pressure should be adjusted in accordance with the tyre pressure table
– Wear and tear on the tyres should be inspected
– The drive chain and the chain rings should be cleaned with appropriate clea-
ning agents and lubricated.
– The gear cables should be checked and, if required, corrected.
– Wear and tear on the brake pads and brake discs should be inspected
– Pressure in the suspension elements should be checked
75
WARNING!
To Next Page
