ROVE R2-4K PRO - Hardwire Kit Requirement for Parking Mode

ROVE R2-4k Pro has a built-in Parking Mode Feature,
allowing you to record in the following two ways after parking
yourvehicle.
ANSWER


To utilize a 24-HR parking monitor, you need to provide
power to your dash cam while away from your car.
Hardwiring your dash cam to your car's fuse box is necessary
to give power to the dash cam. ROVE Ultimate USB Type-C
Hardwire Kit is NOT Included in the packaging. Purchase
separately.
The hardwire kit also monitors battery voltage, and it is
designed to cut off power to the dash cam when it detects
low voltage to preserve enough power in the car’s battery
for you to start your car next time.
ANSWER
Before we go into details,
please NOTE that the ROVE
Ultimate USB Type-C
Hardwire Kit is required for
the parking mode to work.
FIRST: Please NOTE that the dash cam is designed to record connuous video
while your car's engine is turned ON and driving.
WHY DO I NEED TO PURCHASE

1
2
50
USER MANUAL