The camera comes with the default settings which allows you to
start using your camera right out of the box without changing any
settings. Make sure to format the memory card before first-time use.
INSTALLATION
1
Installation Position: Most people will install their R2-4K PRO
next to the rear view mirror and opposite side of the driver.
First, Stop the engine where there is some light and in a safe
place, and then remove the key.
Make sure to clean your windshield from dust particles and
evaporated grease from the dashboard surface.
Attach the ROVE R2-4K PRO with the suction mount. Set the
camera lens to point forward to the center when installing it.
2
3
NOTE
WARNING:
16
USER MANUAL
To Next Page
Loading...
