4
5
6
Use the power cord to connect the USB Port of the product to
the car's cigarette lighter socket.
Hide the cable inside the trim and use the included cable clips
for additional support to organize the cable if needed so it
does not interfere with the driver’s vision.
Press the suction mount against the windshield and
while pressing, turn the LOCKING Knob towards
the LOCK position to lock the mount in place.
To Lock The Suction Mount: Press & hold it tight towards the
windshield to remove any air between the suction mount and the
windshield. While pressing & holding towards the windshield,
turn the LOCKING Knob towards CLOCKWISE to LOCK in place.
Only use ROVE’s USB Car Charger, otherwise the camera may
frequently reboot or flicker LCD due to insufficient power.
AVOID THIS
DOT-MATRIX
PATTERN, as suction
mount will NOT be
able to get a strong
suction, hence it will
fall down if you mount
on top of it.
17
To Next Page
Loading...
