7
Adjust the lens angle of the camera.
8
Start the engine and check if the product works properly.
Make sure to remove the Plastic Lens Screen Protector from the lens before
recording videos. Otherwise, your videos will look blurry and blocked.
Do not remove the Micro-SD card while the camera is turned ON.
Otherwise, it may cause the memory card to be write protected and
possible loss of data or damage your memory card. Remove/Insert the
memory card only when the camera is turned OFF.
Simply rotate the
camera 360
o
to
record any direction
you prefer.
Loosen the screw
to adjust the
camera’s view/tilt
angle and then tighten
it to lock that angle.
NOTE
18
USER MANUAL
To Next Page
Loading...
