EasyManua.ls Logo

ROVE R2-4K PRO - Device Handling and Environmental Care

ROVE R2-4K PRO
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
became loose and falls off the windshield while driving.
Do not expose this device to excessive heat, or dust or use any
chemical substance or cleaning solvent to clean this device.
Instead use soft moist cloth for cleaning.
Pay careful attention when cleaning the lens surface. Use a
soft, moist cloth to clean the lens to avoid scratches that may
compromise video quality.
Removing the camera from the vehicle when not in use is
recommended. This prevents the likelihood of theft or exposure
to excessive heat to prevent damage to the unit.
Do not operate or install the camera while driving, or attempt
to change any settings, etc. Pull off the road first and only do
so when it is safe.
Do not drop, puncture, or disassemble this product.
Do not use the charger if the cord is broken or damaged. Keep
out of reach of children.
Do not leave the camera in direct sunlight for a long period of
time or where the temperature could go above 140°F (60°C).
This is NOT a toy. Keep away from children.
For indoor use ONLY.
This camera is intended to use inside a
motor vehicle.
Memory Card: Before inserting the external memory card,
make sure to inspect for physical damage or cracks. Do NOT
use a memory card that shows the sign of physical damage or
cracks, as it can short-circuit the memory card.
Some countries or USA states prohibit drivers from mounting
anything on a windshield or prohibit mounting on certain areas of the
windshield. It is the owner/operator’s responsibility to mount or use of
this device in incompliance with local laws.
The company is NOT responsible for the loss of any data or your
content during operation or in any circumstance.
8
USER MANUAL

Related product manuals