Royal Enfield CRUSADER 250 User Manual

Diagram showing the layout and function of motorcycle controls.

Diagram illustrating the timing chain and adjustment mechanism.

Diagram showing the steering head adjustment points.

Overview of the motorcycle's control levers, pedals, and switches.

Procedure for starting the engine, including fuel and air settings.

Advice on throttle, air lever use, and gear changes for optimal performance.

Recommended procedure for breaking in a new motorcycle engine.

Explanation of the engine's dry sump lubrication system.

Table listing suitable oils and greases for various motorcycle parts.

Guidance on using detergent oils and the necessary precautions.

Instructions for checking and maintaining gearbox oil levels.

Troubleshooting steps for engine stoppage due to fuel issues.

Diagnosis and solutions for ignition-related engine problems.

Procedure for removing carbon deposits from the engine.

Step-by-step guide to removing the engine's cylinder head.

Procedure and specifications for setting engine valve clearances.

Method for setting the correct ignition timing for the engine.

Information on battery types, charging, and maintenance.

Details on setting and maintaining the motorcycle's carburettor.

Procedure for adjusting the clutch control cable for proper operation.

Steps for adjusting the primary and rear drive chains.

Procedure for adjusting the steering head bearings.

Instructions for safely removing the front wheel.

Guide for replacing the motorcycle's rear drive chain.

Recommendations for cleaning the motorcycle's parts.