SECURITY CAMERA User Manual
WWW.RSRTENG.COM Page.119.
SupportRS485 control, Baud 600-115200bps, Compatible with more than
30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc
Output one channel PAL/NTSC color bar video signal for testing monitor or
video cable.(red, green, blue, white and black color )
Test UTP cable connection status and display on the screen. Read the
number on the screen
Captures and analyzes the command data from controlling device, also can
send hexadecimal
NET TOOL PRO-Cable Test, Wireless Tool, Link Tool, Full Duplex
Detection, PING, IP Scan, DHCP Server, PPPOE, OUI Search, Socket
Tool, DNS, LLLDP.
Using the advanced multiplexing technique, the cable tracer and cable test
in the same interface. Find a connected cable from a bundle of cables using
audio tones
Measures PoE switch voltage and displays pin configuration
Digital Multi-meter
*(Optional)
AC/DC Voltage, AC/DC current, Resistance, Capacitance, Data hold,
Relative measurement, Continuity testing. Testing speed: 3 times/ seconds,
Data range -6600~+6600.
Optical power meter
*(Optional)
Calibrated Wavelength(nm): 850/1300/1310/1490/1550/1625nm
Power range(dBm): -70~+10dBm
Visual fault locator
*(Optional)
Test fiber's bending and breakage ( SM and MM fiber)
TDR cable test
*(Optional)
BNC cable, network cable, telephone cable, RVV cable and elevator cable,
cat 5/6 cable’s length and short circuit. measurement range 1.2KM
BNC attenuation test
*(Optional)
Through hardware high-speed sampling and processing technology, test the
BNC coaxial cable transmission attenuation value, detect the transmission
quality of BNC cable.