SECURITY CAMERA User Manual
WWW.RSRTENG.COM Page.20.
3.3.7 IP discovery
Press IP discovery , tester auto-scan the whole network segment IP, as well as auto-modify the
tester's IP to the same network segment with the scanned camera's IP.
Local IP: Tester's IP address, Tester can auto-modify the tester's IP to the same network segment with
the scanned camera's IP
Discovery IP: Connected tester equipment's IP address. If the camera connected to the tester directly,
tester will display the camera's IP address, if tester connects to Local Area Network, it displays the
current IP address.
Temp IIP: After searching IP address, the modified tester's IP address will not be saved, if you do not
select "Temp IP" the modified tester's IP address will auto-save after searching.
Start: PING function, Click "Start", can PING camera's IP
Rapid ONVIF: Rapid ONVIF Quick link
NON ONVIF: NON ONVIF Quick link
Applicability: Using IP discovery app, you don't need to know the first two digits of camera's IP
address, it can auto-scan the whole network segment IP, and auto-modify tester's IP address, greatly
improved engineering efficiency .
To Next Page
Loading...
