SECURITY CAMERA User Manual
WWW.RSRTENG.COM Page.88.
c. While testing the capacitance of a capacitor to 660uF, the Max time will be 6.6 seconds, if the cap
acitor is leaked or damaged, the data can't be read.
The tester will be normal after disconnecting the capacitor.
Manual range and Auto range
When testing, click "Range select" to change the value, click "Auto range" to enter Auto
measurement.
Data hold
Click "Hold data" to enter, the data be hold, the value is green. Press it again to quit.
Relative value measurement
Click "Relative "to enter, the tester Auto-save the data, the displayed new measurement and
relative value is red color. Press it again to quit.
The hold function and the relative value be combined use, the display value is yellow
The meter protection
Voltage protection
You can't input the voltage which more than 660V AC, it's possible to show higher voltage, but
it's may destroy the inner circuit.
Resistance, Continuity, Diode, PTC component Protection
Wrong input voltage, will Auto enter protection state , It only suitable for short and limit time work.
To Next Page
Loading...
