Need help?Do you have a question about the RTI XP-3 and is the answer not in the manual?
General| RS-232 Ports | 2 |
|---|---|
| Storage | 128 MB Flash |
| Ethernet | 10/100 Base-T |
| Power | 12VDC 1A |
| Ports | Ethernet, IR, RS-232, Relay, Sensor |
Key usage and environmental guidelines for the XP-3 processor.
Minimum system requirements for Integration Designer software.
Instructions for checking contents and inspecting the XP-3 upon arrival.
Guidance on how to physically install the XP-3 unit.
Information on powering the XP-3 unit via AC adapter or PoE.
Details on using Power-Over-Ethernet for XP-3 power.
How to connect the RTI RM-433 antenna to the XP-3.
How to connect an RTI in-wall keypad to the XP-3.
Using voltage sense inputs for triggering events and macros.
Connecting infrared emitters to the XP-3's output ports.
How to adjust the IR output level for reliable device control.
Connecting RTI power sensor modules to the XP-3.
Connecting RTI communication modules to the XP-3.
Information on the XP-3's relay outputs for load control.
Details on connecting the XP-3 to an Ethernet network.
Using the USB port for programming and firmware updates.
Information on the XP-3's RS-232 serial communication port.
Steps and methods for programming the XP-3 processor.
Understanding the status LED indicators on the XP-3.
Meaning of the Net Link LED for network status.
Meaning of the RF Link LED for wireless communication status.
How to set the zone code for RF communication.
Diagrams illustrating various connection possibilities for the XP-3.
Common issues and solutions when the XP-3 is not working correctly.
Troubleshooting steps for non-functional power sensor modules.
Solutions for problems with the XP-3's USB programming connection.
Troubleshooting steps for Ethernet programming issues.
Contact information for general inquiries about RTI products.
How to get technical assistance for RTI products.
Instructions and guidelines for shipping the XP-3 for service or repair.
To Next Page
