To Next Page

To Previous Page

It’s Under Control

Thank you for using the XP-3 Remote Control Processor.

The XP-3 is designed to automate and enhance the operation of A/V,

security, lighting, HVAC, and countless other devices in a commercial

or residential environment. The XP-3 is packed with features including

a variety of control options, such as two-way RS-232, relays, Ethernet,

and routable IR. The processor also has a built-in 2.4 GHz ZigBee

transceiver for sophisticated bidirectional communication with compatible

RTI remote controls. The XP-3 can also be congured to support 433MHz

RF communication using additional RTI accessories and wireless remotes.

For complete control in any room, the XP-3 even allows powerful two-way

control with Ethernet enabled RTI in-wall controllers, and reliable one-way

control with compatible RTI in-wall products.

IMPORTANT NOTES

Please read these important notes about the XP-3:

The XP-3 should be placed in an area where it is around normal room

temperature (between 60°F to 90°F).

Avoid installing the XP-3 in a location where it can come in contact

with direct sunlight.

Do not let the XP-3 get wet. It should not be handled with wet hands

or placed in an area where it could get wet.

Do not subject the XP-3 to smoke, dust, or vibrations.

Only use the power supply that is specied for the XP-3. Using the

wrong type of power supply may result in damage.

Do not disassemble the unit. Service of the XP-3 should be performed

by authorized personnel only. Service of the XP-3 performed by

unauthorized personnel will invalidate its warranty.

SOFTWARE REQUIREMENTS

The recommended minimum system requirements needed to run the

Integration Designer

software are as follows:

Windows XP

, Windows Vista

, Windows 7

or later version of Microsoft

operating system.

CHAPTER 1 | WELCOME

RTI XP-3 User Manual

Other manuals for RTI XP-3