Need help?Do you have a question about the RTI Under Control XP-8 and is the answer not in the manual?
General| Two-Way Communication | Yes |
|---|---|
| Network | 10/100 Ethernet |
| IR Output | 8 ports |
| Power | 12V DC |
| Mounting | Rack mountable |
| Ports | Ethernet, USB, IR, RS-232, Relay, Sensor |
| Connectivity | IR, Relay, Sensor |
Key operational guidelines and warnings for the XP-8 unit.
Explains how to program the XP-8 using the Integration Designer™ software.
Details how to connect the power adapter to the XP-8 unit.
Identifies the USB port used for downloading software.
Details how to connect infrared emitters to the XP-8's output ports.
Explains how to connect RTI power sensing modules (VPS-1/SPS-1) to the XP-8.
Guides on connecting RTI communication modules like CM-232 to the XP-8.
Explains RS-232 connectivity and details the RJ-45 to DB-9 adapter pinout.
Details how to connect contact closure or voltage trigger inputs to the XP-8.
Explains how to configure and use the XP-8's relay and trigger outputs.
Explains connecting the XP-8 to a 10/100 Base-T Ethernet network for programming and updates.
Provides tools and procedures for diagnosing system issues.
Troubleshooting steps for when the XP-8 unit is not operating as expected.
Troubleshooting tips for when the USB programming port is not recognized or working.
Information needed for requesting technical support via phone, fax, or email.
To Next Page
