RTS Altus - Pair New Channels or Remotes; Prepare Motor for New Control Pairing; Program New RTS Control to Motor

RTS Motors
Pair new channels or remotes
26
1
Set the motor in programming mode with an existing RTS control
jiggle = motor ready
to record new control
Centralis RTS Telis RTS
OR
Press
for 3
secs
Press
for 3
secs
RTS control
already assigned
to the motor
2
Program the RTS control
jiggle = new control
recorded
Centralis RTS Telis RTS
OR
Press
for 1
secs
Press
for 1
secs
New RTS control
to assign to
the motor
When using a Multi-channel RTS control, remember to
select the desired channel prior to programming.