RTS Altus - Important Notes

© copyright SOMFY Pty. Limited 2013
27
RTS Motors
Pair new channels or remotes
The Motor
Jiggles
END
START
Connect the Motor
to 240 Volts, if not
already connected
IMPORTANT NOTES:
o This procedure will only work if
you have an existing remote
that has already been
programmed to the motor.
o The pre-existing programmed
channel will not be deleted in
this procedure.
Is the
Remote Single
or Multi
Channel?
MULTI
Select the
Pre-programmed
Channel
Press & Hold the
Program Button
on the Remote for
3Second
SINGLE
Select the New
Channel or
Remote
Select the
Pre-programmed
Existing Remote
Press the Program
Button briefly
The Motor
Jiggles
Check
Functionality