RTS Altus - Important Note

© copyright SOMFY Pty. Limited 2013
29
RTS Motors
Removing a RTS control from the motor
The Motor
Jiggles
START
Connect the Motor
to 240 Volts, if not
already connected
IMPORTANT NOTE:
This procedure will only work if
the motor you want to delete is
programmed to at least 2
Remote Channels.
Is the
Remote Single
or Multi
Channel?
MULTI
Select the
Pre-programmed
Channel you wish
to keep
Press & Hold the
Program Button
on the Remote for
3Seconds
SINGLE
Select the Existing
Remote you wish
to keep
END
Press the Program
Button
The Motor
Jiggles
Select the
Pre-programmed
Channel or
Remote you wish
to Delete