PortaMonitor Getting started • Page 6-5
6.6. Safety symbols
The following symbols may be marked on the panels or covers of
equipment or modules, and are used in this manual:
WARNING! - This symbol alerts you to a potentially hazardous
condition, such as the presence of dangerous voltage that could pose
a risk of electrical shock. Refer to the accompanying Warning Label
or Tag, and exercise extreme caution.
ATTENTION! - This symbol allerts you to important operating
considerations or a potential operating condition that could damage
equipment. If you see this marked on equipment, consult the User´s
manual or Operator manual for precautionary instructions.
FUNCTIONAL EARTH TERMINAL - This symbol marks a terminal
that is electrically connected to a reference point and is intended to
be earthed for any functional purpose other than safety.
PROTECTIVE EARTH TERMINAL - This symbol marks a terminal
that is bonded to conductive parts of the instrument. Confirm that this
terminal is connected to an external protective earthing system.
6.7. Safety information
Please read this safety information before using the instrument:
Do not service or repair this product unless properly qualified.
Servicing should be peformed only by a qualified technician.
There are no user servicable parts inside the unit. Do not open the
case while the unit is connected to power. High voltage exists inside
the instrument.
The device has been designed for indoor use only.
Do not substitute parts or make any modifications without the written
approval of RTW. Doing so may create safety and EMI hazards.
To Next Page
Loading...
Need help?
General
