Ruijie Reyee RG-RAP2200

Hardware Installation and Reference Guide Product Overview
1
1 Product Overview
Featuring leading 802.11a/b/g/n/ac Wave1/Wave2 and MU-MIMO, Ruijie RG-RAP2200(E) supports 2 spatial streams and
delivers up to 400Mbps at 2.4GHz and 867Mbps at 5GHz. The overall dual-radio dual-band performance speeds up to
1.267Gbps per device, totally eliminating Gigabit wireless bottlenecks. RG-RAP2200(E) adopts either local power supply
or PoE power supply, and can be ceiling-mounted in indoor Wi-Fi coverage scenarios with large areas. RG-RAP2200(E)
provides two Gigabit Ethernet ports, making it possible connect a camera or switch device to adapt to challenges in a wide
variety of deployment scenarios.
1.1 Technical Specifications
Table 1-1 RG-RAP2200(E) Technical Specifications
Model
RG-RAP2200(E)
RF
Dual-band and dual-radio
Transmission
Protocol
Support concurrent 802.11ac wave2/wave1 and 802.11a/b/g/n.
Operating Bands
802.11b/g/n: 2.4 GHz to 2.4835 GHz
802.11a/n/ac: 5.15 GHz to 5.35 GHz, 5.725 GHz to 5.85 GHz
Antenna
Built-in antenna
Spatial Streams
2.4GHz: 2 x 2 MIMO
5GHz: 2 x 2 MIMO
Max Throughput
2.4GHz: up to 400 Mbps
5GHz: up to 4.8 Gbps
Up to 1.267 Gbps per AP
Modulation
OFDM: BPSK@6/9 Mbps, QPSK@12/18 Mbps, 16-QAM@24 Mbps, 64-QAM@48/54 Mbps
DSSS: DBPSK@1Mbps, DQPSK@2Mbps, and CCK@5.5/11Mbps
MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM
Receive
Sensitivity
11b: –91 dBm(1 Mbps), –88 dBm(5 Mbps), –85 dBm(11 Mbps)
11a/g: –89 dBm (6 Mbps), –80 dBm (24 Mbps), –76 dBm (36 Mbps), –71 dBm (54 Mbps)
11n: –83 dBm@MCS0, –65 dBm@MCS7, –83 dBm@MCS8, –65 dBm@MCS15
11ac: HT20: –83 dBm (MCS0), –57 dBm (MCS9)
11ac: HT40: –79 dBm (MCS0), –57 dBm (MCS9)
11ac: HT80: –76 dBm (MCS0), –51 dBm (MCS9)
Transmit Power
20 dBm (adjustable)
Transmit Power
Adjustment
1 dBm
Dimensions
(W x D x H)
194 mm x 194 mm x 35 mm (7.6 in. x 7.6 in. x 1.4 in.) (excluding brackets)
Weight
≤ 0.45 kg (excluding brackets)
Service Ports
Two 10/100/1000BASE-T Ethernet uplink ports:
LAN1 port is PoE/PoE+-capable