Hardware Installation and Reference Guide Product Overview
3
The AP is NOT receiving power.
Normal operation, but there are alarms.
1. Restoring the factory settings
2. Upgrading the firmware
3. Restoring the image file
4. Initializing the device
Press for less than 2 seconds
Press for more than 5 seconds
Restore the factory settings.
1.4 Power Sources
The AP can be powered either with a power adapter or through Power over Ethernet (PoE).
Use DC power adapters with specifications recommended by Ruijie.
The power adapter is customer-supplied.
To use a PoE device, make sure that it supports the IEEE 802.3at standard.
1.5 Cooling Solution
The AP features a fanless design.
Leave sufficient space surrounding the AP when installing the AP to permit proper airflow for ventilation.
To Next Page
Loading...
Need help?
General
