Ruijie RG-S2915-L Series User Manual

Hardware Installation and Reference Guide Product Overview
8
System status LED
Status
Blinking
green
The system is being initialized.
Solid green
The system is operating normally.
Solid yellow
A system over-temperature alarm is generated.
Solid red
1. The temperature severely exceeds the
threshold, and the system will be rest and
restart.
2. A system failure occurs.
10/100/1000 Mbps
copper port status
LED
1-48
Off
No link is detected for this port.
Solid green
The port has a 10/100/1000 Mbps link up.
Blinking
The port is receiving or transmitting data.
SFP port status LED
49F-52F
Off
No link is detected for this port.
Solid green
The port has a link up.
Blinking
The port is receiving or transmitting data.
Solid yellow
The optical attenuation value exceeds the value
specified in the communication quality
requirements.
Solid red
The optical module is in position, but the optical
module fails or an optical link failure occurs.
1.3 RG-S2915-16GT4MS-L
Technical Specifications
Model
RG-S2915-16GT4MS-L
CPU
Built-in CPU, single-core processor, with the clock speed of 1.2 GHz
BOOT ROM
N/A
Flash Memory
64 MB
SDRAM
DDR4 512 MB
Supported Modules
See Appendix B
The module types may be updated without prior notification. Please contact Ruijie
Networks for details.
SFP Port
2500Base-X Capable
1000Base-X Capable
100Base-FX Capable
Power Supply
AC input:
Rated voltage range: 100 V AC to 240 V AC
Maximum voltage range: 90 V AC to 264 V AC
Frequency: 50 Hz/60 Hz
Rated current: 0.6 A
Ground Leakage Current
≤ 3.5 mA
EEE Function
Support
PoE Function
Not Support

Ruijie RG-S2915-L Series Specifications

General

Brand	Ruijie
Model	RG-S2915-L Series
Category	Switch
Language	English