Hardware Installation and Reference Guide Appendix B — Mini-GBIC Modules
45
Category 5 (or above ) UTP or STP
For SFP modules with a cabling distance of over 40 km (including 40 km), install an attenuator to avoid overload when using
short fiber-optic cables.
An optical module is a laser transmitter. Do not stare at any light source to prevent it from burning your eyes.
To keep the module clean, make sure that the dust cap is mounted when it is not connected to cables.
Table B-4 Models and Technical Specifications of SFP Cable Module
No additional cable needs to be connected when an SFP cable is used. You need to only plug both ends of the SFP cable into the
corresponding ports of the switch.
Table B-5 Pairing Models of the 1000 M / 2.5 G BIDI Optical Modules
2.5G-SFP-LX03-SM1310-BIDI-I
To Next Page
Loading...
Need help?
General