F11GIM User Manual
Copyright ©2021 Ruko All Rights Reserved.
16
Checking Battery Level
Press and hold the power button, after the indicator light turns on to the fourth, release
the power button to check the current battery level
.
Powering On
Press and hold the power button for 3 seconds, release the power button after the
indicator light turns on to the fourth. When turned on, the power indicator shows the
current battery power.
Powering Off
Press and hold the power button for 3 seconds, release the power button after all
the indicator lights are off; after turning off, the indicator lights are all off.
Low Temperature Notice
When using the battery in a low temperature environment (0°C to 5°C), make sure
that the battery is fully charged. The discharge capacity of the battery will be
reduced when working in a low temperature environment.
In a low temperature environment, due to the battery output power limitation, the
Aircraft's wind resistance and flight performance will be reduced. Please be careful.
You need to be extra cautious when flying in low-temperature and high-altitude
environments.
Do not install the battery into the Aircraft or remove the battery from the Aircraft when
the battery power is turned on. Otherwise, the poor contact of the battery interface
during the operation may cause the battery to short-circuit and burn the Aircraft. The
battery must be installed or removed with the battery power turned off.
To Next Page
Loading...
