F11GIM User Manual
Copyright ©2021 Ruko All Rights Reserved.
25
4.4 Linking the Transmitter
5.1 Home
After running RUKO DRONE App, enter the homepage.
5 Ruko Drone App
If the connection is successfully, the Aircraft light will turn pink.
Before each flight, check the power of the Transmitter. The Transmitter will "beep" when
the battery is low. The Transmitter will automatically shut down after 10 minutes of
inactivity. Toggle the joystick or press any button to restore the Transmitter to its normal
working state.
When using the Transmitter handle to hold a mobile device, be sure to press it firmly to
prevent the mobile device from slipping off.
Keep the battery at around 3.8-3.9V, and recharge it every 1 month or so to keep the
battery active.
Before each aircraft flight, you need to link with the Transmitter. After the linking is successful,
you can control the flight of the Aircraft. The steps for the pairing are as follows:
• Turn on Aircraft
• Turn on Transmitter
• Flick the left stick of Transmitter up and down, and after the Aircraft emits a beep, it means
the linking is successful.
• Connect your mobile phone to Aircraft’s WiFi "RUKO-GIM-******", tap the app to enter the
control interface; the mobile phone screen displays information such as the Transmitter’s
battery signal and camera screen.
F11 GIM
To Next Page
Loading...
