TECHNICAL MANUAL FOR THE RDR BL3 - V1.1 DRIVE ROLLER Rev. 21/09/2018 page 38
17 WARRANTY
Rulmeca’s Warranty runs for 12 months from the date of delivery and covers
material and/or manufacturing faults in Drive Rollers.
Under the Warranty, Rulmeca products, once they have arrived at the factory in
Almè (BG) and have been proven to be defective, will be repaired or replaced
under warranty.
- The Warranty does not cover the costs of dismantling and re-assembling the
products from the conveyor and their transport.
- The Warranty is voided if the product has been overloaded, if the cable is twisted,
if the product has been installed incorrectly or has not been wired in compliance
with the wiring diagrams and assembly and connection instructions and notices in
this manual, if it has been tampered with, altered or cleaned using unsuitable
procedures or products or if persons have worked on it who have not been
authorized by RULMECA.
- The Warranty does not cover normal wear and tear to the shell, any cladding or
rubberized features or damage due to blows or accidents.
- The Warranty does not cover indirect damage or damage due to lost production
(for critical applications, keep spare Drive Rollers for rapid replacement).
- The Warranty is applied to Rulmeca Customers and cannot be transferred to
third parties.
To Next Page
Loading...
General