TECHNICAL MANUAL FOR THE RDR BL3 - V1.1 DRIVE ROLLER Rev. 21/09/2018 page 7
3 PACKAGING AND DELIVERIES
The Drive Rollers are packed and delivered in suitable and completely undamaged packaging. The Drive Rollers
are padded and spaced apart to ensure that no part of the Drive Roller gets damaged during transport.
If the customer finds damage to the package, he must immediately inform the courier by writing "accepted with
reservations" on the delivery note and then send a copy to Rulli Rulmeca.
The material is always accompanied by the relative installation instructions in an updated version and by the
components if they cannot be fitted directly to the Drive Roller.
When opening the package, NEVER handle the Drive Roller by holding it, pulling it or moving it by its power cable
in order not to damage the internal electric joints.
Any breakages caused by such negligence are not covered by the warranty.
3.1 Delivered Drive Rollers
Each RDR BL3 Drive Roller, before being delivered to the customer, has all its functions tested.
A sticker is affixed to the Drive Roller BL3 that has passed all the function and quality tests to certify that it has
passed the inspections.
In the case of Drive Rollers with a shell covered with rubber or special finishes, the quality control label will be
placed on the installation manual in order not to spoil the outer finish of the Drive Roller.
To Next Page
Loading...
General