MODEL 53515/53615/63515/63615/73515/73615
Before the valve put into use, please fill in the below content so as to
help us to refer in the future.
Softener System Configuration
Tank Size：Dia. mm, Height mm;
Resin Volume L; Brine Tank Capacity L;
Hardness of Raw Water mmol/L;
Pressure of Inlet Water MPa;
Control Valve Model ; Number ;
The Specification of Drain Line Flow Control ;
Injector No. .
Water Source: Ground-water□ Filtered Ground-water □
Tap Water □ Other .
Parameter Set
Control Mode A-01/02/03/04 (Only
suited for 63615/73615),53515 only
have A-01/02
Water Treatment Capacity（Meter
type）
Service Days（Time clock type, by
days）
Interval Backwash Times (Only suited
for 73515/73615)
To Next Page
Loading...
Need help?
General
