EasyManuals Logo

Runxin 53515 User Manual

Runxin 53515
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
MODEL 53515/53615/63515/63615/73515/73615
5
Remote handling input
This connector can receive external signal, used together with PLC,
and computer etc. to control the valve. (Application refers to Figure 3-11)
Pressure relief output
The valve will cut off feeding water to drain line when it switches in
regeneration cycles (Same as signal output b-02). Thus in some water
treatment system, e.g. Deep Well, one booster pump was installed on
the inlet to increase the system water feeding pressure, this cut-off will
cause pressure on inlet rising too fast to damage the valve. Pressure
Relief Output can be used to avoid this problem. (Application refers to
Figure 3-10)
All parameters can be modified
According to the water quality and usage, the parameters in the
process can be adjusted.
Four kinds of meter type can be selected (Suit for 63615/73615)
Name
Instruction
Meter
Delayed
Regenerate on the day although the available volume of
treated water drops to zero (0). Regeneration starts at the
regeneration time.
Meter
Immediate
Regenerate immediately when the available volume of
treated water drops to zero (0).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Runxin 53515 and is the answer not in the manual?

Runxin 53515 Specifications

General IconGeneral
BrandRunxin
Model53515
CategoryControl Unit
LanguageEnglish

Related product manuals