Runxin 55504 - Process Display

MODEL：F67Q/F71Q/F68Q/F69Q/F116Q/F117Q
21
Regeneration
Days
treated water does not drop to zero
(0).
Output
Control
Mode
b-01 01 01 or 02
b-01
：
Signal turn on when
regeneration started
and shut off at
the end of regeneration.
b-02 ： Signal available only in
intervals of each status.
B. Process Display (Take A-01 as example)
Figure A Figure B Figure C
Figure D Figure E Figure F
Figure G Figure H
Illustration:
 In Service status, the figure shows A/B/C/D. Figure C shows time of day, the
middle “:” flashes. Figure D shows regeneration time, the middle “:” turns
on;
 In Backwash status, it shows as figure E/C; In Brine & Slow Rinse status, it